Please note, the wheel does not need to be
removed from vehicle
 |
Pass the cable behind the wheel, so that the two open ends are in front of the tyre. | |
 |
Lift the chain up the tyre to the top of the wheel rim and secure the cable. | |
 |
Fasten the hook on to the last link of the coloured chain, then push the cable behind the wheel and adjust the chain to fit. | |
 |
Insert the tension chain into the non-return locking gear and pull to adjust. Fasten to the coloured chain using the rubber tensioner. | |
 |
Reverse view of wheel. | |